August 16, 2018

EME Conference 2018

Last edited:

www.eme2018.nl

The 18th edition of the International EME Conference will be hosted by the Netherlands. It will take place on August 15-19 in Egmond aan Zee. Every two years the International EME Conference is the place to be to meet fellow "moonbounce" enthusiasts from all over the world.

It has always been my dream to one day make an EME contact, and a couple of years back my dream came true; with a low-budget moonbounce set-up (a single 10 el. yagi and 100 Watts) from my small backyard I managed to make two 2m EME contacts, one with I2FAK and one with KB8RQ. To me, EME is the ultimate DX, the ultimate in a ham's carreer.

So, I believe I'm entitled to say that I belong to the EME "incrowd". I will be attending the EME Conference on Saturday. I'm looking forward to meeting some of the EME experts and to learning more and being inspired during the various and numerous lectures.

The first International EME conference was held in New York City in 1966. Below a history of past editions in chronological order:

  • 1.    1966  New York City, USA
  • 2.    1968  Paramus, NJ, USA
  • 3.    1988  Thorn, Netherlands
  • 4.    1990  Trenton, NJ, USA
  • 5.    1992  Thorn, Netherlands
  • 6.    1994  Göteborg, Sweden
  • 7.    1996  Bowie, MD, USA
  • 8.    1998  Parigi, France
  • 9.    2000  Rio de Janeiro, Brazil
  • 10.  2002  Prague, Czech Republic
  • 11.  2004  Trenton, NJ, USA
  • 12.  2006  Würzburg, Germany
  • 13.  2008  Firenze, Italy
  • 14.  2010  Dallas, TX, USA
  • 15.  2012  Cambridge, UK
  • 16.  2014  Lannion, France
  • 17.  2016  Venice, Italy

For the local ham club I wrote a short article (sorry, only in Dutch) describing all the steps that led to the final result of my low-budget EME setup, and to the succesfull EME contacts I managed to make with it, hoping to inspire others to also try setting up a similar EME station. The article can be found here.

Below the QSL cards received for my EME contact with I2FAK and KB8RQ. Looking at them still fills me with pride!







See also:

http://www.ok2kkw.com/eme1960/eme1960eng.htm - The first Amateur Lunar tests and contacts (I love this site, check it out!)

August 07, 2018

Swedish icebreaker Oden and the mystery of SA2LLL/63

Last edited:




This is the Swedish icebreaker Oden. Built in 1988 and originally used in winter time to keep open the shipping lanes of the Gulf of Bothnia, she was later modified to be used as a polar research vessel. The Oden has been on many expeditions both to the Arctic and the Antarctic, and she was the first non-nuclear surface vessel to reach the geographic North Pole! Seven more visits to the North Pole have followed since.

Currently the Oden is on a research expedition called Arctic Ocean 2018, a joint effort of the Swedish Polar Research Secretariat and the USA's National Science Foundation. At the beginning of August, the Oden left Longyearbyen, Svalbard and started the first part of the expedition to the north polar pack ice. At some point during the expedition, for the duration of about one month, the Oden will be moored at a large Arctic Ocean ice floe and will slowly drift with it towards the North Pole.

The good news for the ham community is that onboard the Oden is amateur radio operator Lars Lehnert SA2LLL (ex DL1LLL). According to his qrz.com page and his special Facebook page, Lars will be active from the Oden with the special callsign 8S8ODEN, in PSK, SSB, and WSPR!

I noticed that at the end of July and on August 1st, Lars was already making WSPR spots from the Oden as SA2LLL/MM on the 20m band from grid JQ78tf (Longyearbyen, Svalbard) (Fig. 1). I was not aware of this, and unfortunately was not doing any 20m WSPRing during that time.


Fig. 1  Lars Lehnert SA2LLL/MM making spots on 20m WSPR from the Swedish icebreaker Oden in grid JQ78tf.

When I was doing a 20m WSPR monitoring-only session though on August 3rd, I did receive some WSPR transmissions from SA2LLL/63, three in total, all consistently on 14.097042 MHz and with a DT of around 4 seconds (which is unusually large) (Fig. 2). I have no doubt this was Lars WSPRing from the Oden in the Arctic Ocean, but I have no clue what the /63 stands for. My WSJT-X did not upload the spots to WSPRnet.org, or at the database were simply ignored, most likely due to the received messages not containing a grid locator.
I checked the WSPRnet.org database, but no SA2LLL/63 spots could be found at all made by any other listeners.


Fig. 2  PA7MDJ receiving SA2LLL/63 on 20m WSPR. Receiver and antenna used were an SDRPlay RSP1A and an EFHW wire antenna. Note the frequency and the unusual large DT!

Then some time later that same day I received what probably was the matching second part of the SA2LLL/63 compound WSPR message (Fig. 3). When transmitting a compound callsign in WSPR it will be done in a two-transmission sequence; one carries the callsign and dBm power level, and the other carries the grid locator. When both are received, the WSJT-X or WSPR software will match the two transmissions in the decode screen.

The grid received was JQ78tf, which, looking at the frequency and the fact that SA2LLL/MM already used this grid at the end of July / 1st of August I have no doubt this was also originating from the Oden (Fig. 3). Unfortunately my WSJT-X did not make the match with the SA2LLL/63 message part (probably a too long time between the last reception of the part containing the callsign and the second part containing the grid locator).


Fig. 3  PA7MDJ receiving the second part of the SA2LLL/63 compound message containing the grid locator. Note the frequency and the DT!

Strange thing is that on August 3rd the Oden according to the special Arctic Ocean 2018 web page was not in grid JQ78tf (Longyearbyen, Svalbard) anymore, but already was in another grid north of the Svalbard Archipelago (Fig. 4). It might be that Lars overlooked to update the grid locator (which is quite a hassle on a moving ship when not done automatically). What also puzzles me is why other monitoring stations (many of them equipped much better than I am) also failed to receive the complete matched compound transmissions (as shown by the lack of spots in the WSPRnet database).


Fig. 4  The position of the Oden on August 3rd, north of the Svalbard Archipelago.

Then I remembered that the official WSPR manual notes that when sending compound callsigns, an add-on suffix can be either a single letter or one or two digits. A single letter! So in WSPR TX the /MM add-on will not be possible! I started wondering if maybe the /MM add-on when transmitted would decode into /63.
I decided to do an experiment, and in the settings of my WSPR 2.0 program added /MM to my callsign. I let WSPR 2.0 do some TXing and with a virtual audio cable fed the audio to WSJT-X (please note, no actual RF transmitting was done!) And lo and behold, WSJT-X decoded the messages into PA7MDJ/63 (Fig. 5)! And also, WSJT-X failed to make a match between the two compound messages! I say no more, I guess the mystery is solved.


Fig. 5  The experiment with PA7MDJ/MM sent by WSPR 2.0 and decoded as PA7MDJ/63 in WSJT-X. No match between the two compound messages is made (normally with a match the dots in the < ... > part would be replaced by the callsign).

At PA7MDJ nothing has been heard from the Oden since August 3rd, but Lars mentions on the special 8S8ODEN Facebook page, that he can use the 8S8ODEN callsign as soon as they're in international waters. I'm now regularly monitoring 20m WSPR and anxiously await the special callsign to pop up in my WSJT-X decodes.

"Normal " satellite coverage (like INMARSAT) in the High Arctic is minimal to non-existent, and I guess any Facebook or other internet media updates from Lars during the expedition will be sporadic to none.


See also:

https://en.wikipedia.org/wiki/Oden_(1988_icebreaker)
http://www.sjofartsverket.se/pages/41381/Oden%20f%c3%b6r%20webben.pdf
https://polar.se/en/about-polar-research/icebreaker-oden/
https://www.qrz.com/db/8s8oden
https://www.facebook.com/8s8oden-254266508479421/
https://polarforskningsportalen.se/en/arctic/expeditions/arctic-ocean-2018
https://www.helenczerski.net/at-sea/
http://www.marinfloc.com/case-studies/15-breaking-ice-and-new-environmental-ground

July 24, 2018

Stay tuned for HAARP WSPR transmissions!

Last edited:

Ok, what are they up to at HAARP (the High Frequency Auroral Research Program in Gakona, Alaska)? Are they really going to do it? Some recent posts by HAARP Chief Scientist Chris Fallen KL3WX on Twitter (see below) suggest that they're really going to do some tests in WSPR mode during the summer research campaign coming up soon!
I like the thought of maybe being one of the initiators of these HAARP WSPR tests; I suggested using WSPR mode to Chris Fallen in a Twitter post long time ago, and I also suggested it in my blog post / open letter to Chris Fallen here.
I'm really excited about this news, and I'm really looking forward to catching some WSPR signals from HAARP soon.










During the last research campaign, in the spring of 2018, I was quite successful at receiving and identifying one of the HAARP transmissions. The observed odd off time of one of their transmissions on 9.500 MHz helped me identify with 100 percent certainty the received signal as coming from HAARP.

HAARP signal as received by PA7MDJ on 9.500 MHz on April 8th, 2018 made visible in Spectran and Argo which clearly shows the off time of 01:29:30 UTC, exactly as announced by Chris Fallen on Twitter (see below). This positively identifies the signal as coming from HAARP. Click to enlarge.




During one of their earlier campaigns I was already successful at receiving HAARP on 9.500 MHz, but then the observed off time of exactly at the hour left some room for doubt (although not much, see my blog post here).
The received HAARP signals consisted of a carrier only, and there was no other way to identify the signals than by observing the start / off times of the received signal and to see if they correspond to the announced start / off times. The HAARP WSPR signals without doubt will be a lot easier to identify.

If you're interested in my other blog entries about HAARP, take a look here.

July 16, 2018

Recommended reading

Last edited:

Just some interesting articles I've recently discovered and that I'd like to share. One about the mystery of Long Delayed Echoes that every now and then are observed on the MF and HF bands, and one about Portable Amateur Radio in the 1960s and up until now.

The Five Most Likely Explanations for Long Delayed Echoes by Sverre Holm, LA3ZA, University of Oslo

Portable Amateur Radio, W7ZOI/7 by Wes Hayward, W7ZOI

Enjoy!

Wes Hayward in 1967 operating W7ZOI/7 on the summit of Mt. Adams, Washington State (source)


Addendum:
Also make sure to check out Sverre Holm's excellent blog with lots of entries on QRP operation, Pixies, Altoid projects, Unusual HF propagation, and much more!

July 05, 2018

Magic Band Whispers - Morocco with 100 mW and an indoor dipole!

Last edited:

Mission accomplished: my 100 mW WSPR signal was received via Sporadic E (Es) on 6m in Morocco! This was one of the goals I had set for this Es season for 6m WSPR (see also my blog entry of  May 17th). The transmitter and antenna used were a QRP Labs U3S and a simple homebrew indoor dipole in the attic for the 6m band!


CN8LI in Morocco hearing PA7MDJ

12 hours period of 6m WSPR reception at CN8LI


Morocco is my 70th DXCC reached with WSPR with ≤ 200 mW of power.

CN8LI keeps an interesting blog on cn8li73.blogspot.com.

May 18, 2018

Yaesu YF-122C CW filter / QRP CW contact with the Faroe Islands

Last edited: 20.05.2018

I'd been looking into buying a narrow CW filter for my Yaesu FT-817nd rig for some time, but the high price (about € 130) for both the YF-122C (500 Hz) and YF-122CN (300 Hz) had been holding me back. But this week I got the opportunity to buy a used YF-122C filter for less than half the price of a new one. I couldn't let this offer go.


My Yaesu FT-817nd last summer on the summit of Pilatus mountain in Switzerland

Today the filter was delivered by the mailman. I spent about half an hour on installing the filter, and after some initial tests I must say it's working great! Installation of one of the optional filters into the FT-817nd is easy; just take out some screws, remove the rig's top case, and push the filter board onto the designated pins on the main board of the transceiver!

The 500 Hz filter will definitely make CW QSOs with the FT-817 a lot easier, and I'm all ready to do some more SOTA activations with it coming summer.






Before installation. The filter goes onto the main board in the designated free space opposite of the tuning knob.

After installation

After installation of the filter I made a nice CW contact with the FT-817 with OY1CT on the Faroe Islands. The contact was made as PA7MDJ/QRP on 20m using just 5 Watts and my HyEndFed 10/20/30 wire antenna. You can listen to the contact below (sorry for the background noises, please don't pay attention to them, hi). This contact was made with the 500 Hz filter activated.




And while talking about the FT-817, one site I always like to return to for more information about this popular QRP and backpack rig is "The KA7OEI FT-817 pages". Another interesting site is "K6XX's FT-817 page". If you're a FT-817(nd) owner these sites might be of interest to you as well.

May 17, 2018

6m Sporadic E and the Maldives on 20m (WSPR chatter 5)

Last edited:

It's May and that means that the Sporadic E (Es) season is upon us. I've always been fascinated by this unusual radio propagation phenomenon, and I have fond memories for instance of the 1990s when I did a lot of VHF band I TV DXing, with Es during spring and summer enabling me to catch TV stations from all over Europe and sometimes even beyond.

For this Es season I had planned to do some 6m WSPRing with my QRP Labs U3S. So recently I quickly built the U3S 6m LPF kit that had been lying around for some time, and I also made a simple 6m dipole. And with simple I mean really simple; just some wire cut to resonance, some pvc pipe insulators, and lots of hot glue. The antenna is placed indoors in the attic.


The centre insulator of the simple indoor dipole made for 6m WSPR

With my U3S on the HF bands frequency drift never had been a real issue (mostly 0 on the lower bands, and mostly 0 to 1 or an occasional 2 Hz on the 20m band), but now on 6m the drift was considerable, mostly 4 Hz, probably making decodes impossible or difficult. But setting the "park mode frequency" to mode 2 and 150 MHz (to keep the U3S' DDS warm in between transmissions) cured the problem and reduced the drift down to 0 to 1 Hz.

The power of the U3S on 6m is less than on HF; on the "Magic band" I measured it puts out less than a 100 mW.

Es conditions so far haven't been great, and I've also noticed that there isn't really much of a "WSPR scene" on 6m  (which I find very strange, as 6m is really interesting to do WSPRing on to study the unusual and fascinating propagation phenomena of this band). Nevertheless, a couple of days ago my tiny 6m Es WSPR signals were spotted for the first time thanks to SV2HNH in Greece. On HF it wouldn't be that special, but now I was really excited about it.


SV2HNH hearing PA7MDJ on 6m




I will be WSPRing on 6m this Es season on and off. There's a very active monitoring station in Morocco (CN8LI), and for the remainder of the season I've set my goal to having my WSPR signals picked up by this station at least once.

Further exciting news is that my 200 mW WSPR signals were picked up on 20m by 8Q7HI on the Maldives, my 69th DXCC reached with 200 mW WSPR (see my WSPR DXCC list here). TX was my U3S, and the antenna used was a HyEndFed 10/20/40.


8Q7HI hearing PA7MDJ on 20m





See also:

https://en.wikipedia.org/wiki/Sporadic_E_propagation
https://en.wikipedia.org/wiki/Band_I